Remember Esmee’s Unicorn? From the start I had ideas about using the pelmet-weight interfacing which it was stitched on for a couple of other, more or less experimental projects. One is a goldwork brooch, but as there are a few challenges there (the sturdier metals generally need plunging and cause a bulky back, the metals that conveniently stay completely on the front tend to be more fragile and prone to being squashed) I decided to leave that for now. But this material is also very suitable for introducing young ones to stitching: it’s stiff enough to stitch in hand without needing a hoop, if pre-pricked it can be stitched with a blunt needle, and it can be cut into shapes without fraying. So I started with a simple project that could be finished as a brooch or a fridge magnet (or, I suppose, a needle minder, except the stitching might get in the way).
The first thing was to pick a design; ideally one with bold, simple lines and not too many colours. Was there anything in my collection that would fit the bill? Yes there was – an as yet unstitched floral design based on a print by Vicky, my extremely talented niece-in-law-in-law (my husband is her husband’s uncle) who is artistically known as Woah There Pickle. The whole thing would be too big for this purpose, but I did once extract a single daisy from it to stitch as a birthday card for Vicky. What if I used that, slightly smaller, with only one pair of leaves, and done as a forget-me-not? Although for a children’s kit I’d probably use standard DMC, I figured that for this trial version I could use up some discontinued hand-dyed Carrie’s Creations threads, so I picked some suitable colours and set about tracing the flower.
Next up was pricking the design onto the interfacing. I varied the depth of the pricking to see what size holes I could make, and which size would be best. The jury’s out on that one; bigger holes make it easier to find them with the needle for inexperienced stitchers, but smaller ones can be closed up if you decide you want to put the stitch in a slightly different place. One thing is certain, if the intention is for the stitcher to use the existing holes they need to be pricked more accurately than I did here, as the evenness of the stitch length will be determined by the pricking.
To add a bit of extra colour without having to do more stitching, I first lightly shaded the various parts using colouring pencils. I tried applying more pressure on a bit of spare interfacing to see if you could create brighter colours, and you can – good to know for future projects.
My original idea was to do the whole thing in backstitch, on the grounds that that would be easier for young stitchers than stem stitch, and you can always add interest by whipping some of it. In fact you could make it even easier by using whipped running stitch. But I like the look of stem stitch, so for this model that’s what I went with. And as the model is experimental anyway, I even tried some split stitch and satin stitch. The former works fine, although if that is the intended stitch from the outset it would be better to put the holes a little closer together; satin stitch, however, is not ideal on this background. The stitches need to be very close together and in doing so you are in danger of creating a perforated line that will tear. Still, with plenty of strands in the needle that spread a bit, it doesn’t look too bad. Initially I meant to whip the petals, but it would be tricky in the sharp turns where the petals meet, so I confined whipping to the short lines inside the petals.
The stitching was finished – now for the final finishing! As with Esmee’s Unicorn I cut very closely around the stitching, and soon realised that youngsters will probably need some assistance with that; I’m fairly handy with my favourite small pointy scissors, but even so I managed to nick a stitch at the back, which threatened to unravel one of the leaves! PVA glue to the rescue. It is often dabbed around the edges of stumpwork before cutting, and in this case it did the job equally well afterwards.
Meanwhile I had ordered some very thin neodymium magnets, half of them adhesive and half of them plain, from a company Mr Figworthy uses for magnets to stick into sump drain plugs (as you do). When the glue on the flower had completely dried, I stuck one magnet to the back, and paired it with a non-sticky magnet, held apart by a sort of plastic washer that came with them which makes it easier to separate them.
And then it’s just a matter of placing the non-sticky magnet behind the fabric of your blouse or shirt or coat, and the flower on the outside, and hey presto, a brooch that doesn’t damage your clothes! Modelled here by Mr Figworthy, it proved easy to put on and take off, but strongly enough attached not to fall off when accidentally nudged. If you prefer to display it on your fridge just leave off the backing magnet.
What next with heavy-weight interfacing? You may remember that years ago our church used to organise an annual Christmas Craft Event at the local Junior school for the children in the village and the surrounding area. Unfortunately for various reasons we had to give up doing this, but now that we have our lovely new building we felt it might be time to revive the event. And wouldn’t this sort of stitching be just the thing? I’m going to have a little play with a Christmas angel based on some calligraphy I did back in the dark ages – made a bit more chunky, so he’ll be easier to cut out, and outline only, so he’s relatively quick to stitch. I’ll let you know how I get on!