…and was in turn endangered by a miniature gecko. The story of how a goldwork design can be influenced by fabric, bedtime stories, and a Baptist minister.

Once upon a time, in 2015 to be exact, I sketched a whole series of ideas for goldwork designs, among them a toadstool, a sort-of-daisy and a seahorse. Forward a year, and on a visit to the Viking Loom I bought some scrumptious hand-painted silk dupion in turquoise, blue and purple shades. Forward another four years, and I’m starting the goldwork module for my RSN Certificate. For which I need to stitch my goldwork design on silk dupion. Well!

No-brainer, right? Sea-coloured dupion, seahorse – done! Hmm, not quite. All these sketches were for designs without any rules other than what I liked. But the goldwork module comes with a brief; there are only certain materials you are allowed to use (no kid leather, no smooth passing, no rough purl or wire check, no silver or copper let alone any other colours) and there are certain techniques you have to use (bricked Jap, mixed couching, cutwork over soft string padding), sometimes with a specified minimum area. The seahorse couldn’t quite fit all that in, and I’d have to get rid of some of the materials I’d originally included. No worries (keep that expression in mind…), we can add to it. How about a treasure chest? I worked out that that could be made to include several of the required techniques, so I did some sketching to work out the proportions and positions of seahorse and chest to make them into a coherent design.

And then, in my pile of sketches, I came across an undated, very basic sketch of a sitting kangaroo with the scribbled note “find good pose. check eye shape” and an indication of padded cutwork along the tail, and some chipping on the haunch/hip joint. (It also had a small sketch of a hot air balloon, but I ignored that.) A kangaroo… well, it would be unusual; I’d found plenty of sea creatures when looking at previous Certificate goldwork pieces, but no kangaroo (although there was a koala). It wouldn’t work with the hand-painted silk dupion, of course – I’d need to buy some more shades to have a good range of options (oh the hardship). As I talked to Hilary at the Silk Route about this I mentioned that it was now between a seahorse and a kangaroo and she immediately plumped for the kangaroo, simply because it was so unusual; and Angela, my tutor, had also greeted my simple sketch with some enthusiasm, not surprising perhaps as she is Australian .

Anyway, I figured there was no harm in finding some more kangaroo pics and deciding on a suitable position, and what about a pouch and possibly a Joey? And then it hit me. Haasje!

Haasje (“little hare” in Dutch) is the cuddly toy my grandmother bought for me before I was born. For various reasons it was a very special welcome into the world, and Haasje became my constant companion. He was also my champion: when an older cousin told me that “earworms” (Dutch for earwigs) would creep into your ears at night and nibble your brains (I had no older brothers, but my cousins obviously did a great job as substitutes), I looked for a solution to keep me safe. One ear was protected by the pillow, but what about the other? Haasje, of course! For several years I slept with him snugly held against my ear; my mother didn’t find out why until I was a grown-up.

Now when my favourite aunt lived with us for two years and told me bedtime stories every night, she chose Haasje as the protagonist, and in one particularly memorable series of tales he travelled all the way to Australia, where a passing kangaroo gave him a lift in her pouch. He wasn’t used to hopping that fast and high, so he clung on for dear life while nervously looking down at the ground. That was it. The seahorse was forgotten. I had a design!

As is always the case the design went through several changes before it was finalised – it gained some grass, and a cloud with the sun behind it – but the basis for me was a panicky Haasje travelling by kangaroo (I hope to convey his wide-eyed look of fear by means of a big round spangle). In class I did some more work on what materials to put where, where to have padding, and which bits to leave open to contrast with the solid gold parts; the cutwork for the tail remained, as did the chipwork haunch, and other techniques and materials were added in, making sure all the requirements of the brief were covered. When I got home I did a mock-up (not easy for goldwork) to give myself a better idea of the balance between open and solid, and I think I’ve got it about right. I also printed the cleaned-up design on tracing paper to make the pricking needed for the prick & pounce transfer process.

Then in the middle of this whole process, after Haasje had been added but before my class, our minister shared a holiday snap during the Sunday service’s all-age talk of this teeny-weeny little chap (that giant white thing is a teaspoon), almost changing my mind a second time, but although I did find some lovely pictures of miniature geckos in beautifully sinuous positions perfect for goldwork, I decided to stick with Bruce (as I have called the kangaroo) and Haasje.

Remember I mentioned getting some more colours of silk dupion? Here is the selection I got, with the two at the top bought specifically for Bruce. The olive shade was not at all what I was looking for, so that became my doodle cloth, but I absolutely loved the shade called Ether. It was a bit of a surprise as the picture on the Silk Route website was rather brighter, but actually this less saturated look was just what I wanted.

Unfortunately, although the 28cm x 33cm cut was fine as regards size, it had the grain running the wrong way. Well, “wrong” for this particular design. In order to accommodate the design I’d have to use the fabric in portrait orientation, but in that case the grain (which is very visible in silk dupion) runs vertically, and Angela and I both agreed that that would look all wrong. So this piece of fabric will become a second doodle cloth, and I’ve bought a fat quarter of the Ether dupion which is easily big enough to cut a piece of the right size with the grain running horizontally.

This does mean I won’t be able to fully frame up until my next class, as I would much prefer to attach the silk to the calico with a tutor to hand. On the few occasions I’ve attached a piece of silk to backing fabric I’ve ended up with puckers in the silk at the end of the project, so I want to get this absolutely right. Apparently the secret is to baste the two layers together on the design lines when the whole sandwich is under tension.

However, we could get the calico framed up. Angela had never worked with a slate frame this small so it was a new experience for her as well! But apart from everything being rather smaller, the rest of the process is pretty much the same: sew the top and bottom of the fabric to the webbing, sew herringbone tape to the sides, and lace up using the lethal bracing needle (I won’t show you the wounds…)

By the way, do you remember the four protective flaps I made for the big slate frame? True, they overlapped quite a bit, but it will give you some idea of the size difference when you see the effect of a single flap attached to the new frame.

And that’s it so far! I’ve got my homework – getting the silk ironed, sampling some couching and s-ing, creating a tonal plan, pricking the transfer, cutting the layers of felt padding; Angela is definitely keeping me busy . After the next class I hope I’ll be able to show you the silk all framed up and with the design painted on, and who knows even a bit of gold (although all the padding needs to go on first, so it may be a while before I get to play with the bling bits – but there’s always the doodle cloth).