Horsing around

Although I really need to get on with that secret goldwork project, I’m having such fun spending a bit more time with Helen McCook’s racehorse that I keep coming up with excuses – the latest one is that the hoop needed for the new project is currently in use holding my Canvaswork sample cloth, and I have to wait for the arrival of two 25cm Nurge hoops (my favourite brand), one 16mm and one 24mm deep. And then of course there will be a further delay until I’ve got round to binding it. So apart from doing some preparatory work for my first proper Canvas class next week, I’m enjoying an equine binge.

The first thing to do since the last update was to get rid of those pesky black outlines which I failed to cover when plunging the couching on the horse’s flank (feel free to let me know if that’s not the right term, I’m not a horse expert). There were a few options including a Jap outline, but in the end I decided to go for a solid filling of chips – for one thing that meant no plunging and oversewing! I chose the thinnest bright check, no.8, and tried to follow the lines as well as possible while still placing the chips in random directions. Chips are never going to make a truly sharp point, and in close-up you can see that the outlines are not smooth (you wouldn’t expect them to be), but when taking in the whole horse from a normal viewing distance I think it blends in well enough.

Visible lines The missed bit filled in with chipping The chipping in the context of the whole horse

On to the remaining bits of the back legs, worked (apart from a small length of pearl purl) in gold and copper rococco. Now the rococco that came with the class kit is big. I mean, really big. I have Very Fine, Fine and Medium rococco in my stash and Medium is as chunky as I would choose to go in any of my own projects. This looks a definite Large. It is an absolute pig to plunge, and I don’t even like the look of it very much because it is very difficult to “synchronise” the waves (the first picture shows it in the horse’s tail). I could have used a smaller size from my stash, but instead I went for check thread, rococco’s modest little sister. Much in the way that I prefer passing to Jap, I prefer check thread to rococco. It gives the same sort of effect, but it’s a lot easier to work with!

Large rococco in the tail Couched check thread The whole horse showing large rococco and check thread

The overview picture also shows my start on the grass. The kit came with bright green 471 thread, which is a bit like a fine passing thread available in lots of colours. Compared to the bottle green fabric that seemed rather too bright and too much towards the yellow end of green. In my stash I found a no. 1½ twist in Opal Green which is a lovely shade, but that was a bit too much towards teal/turquoise. Then, playing with them both at my Embroidery Group meeting (last one before the summer holiday, alas), I had a flash of inspiration: why not combine them? So I did, and I really like the effect of the blended colours and contrasting textures! When I started the second line of grass my first stitch happened to be exactly in line with the couching on the first line of grass, which looked odd, so I took it out and “bricked” it, even though the lines of couching are not directly next to each other, which I felt made for a more pleasing effect.

Two greens Combining two threads and bricking the stitches

By the way, finishing off the grass in the evening was possibly not the best decision. In spite of the floor to ceiling window in our dining room (where I like to stitch on larger and more complicated projects) the gloomy evening sky did nothing to help while couching two shades of green on dark green fabric using a green couching thread… Still, I managed, even if I did almost pull one bright green thread out completely when plunging its second end. Fortunately the unravelled first end consented to be gently persuaded back down the fabric, leaving the thread at the front acceptable if not pristine.

Working in the gloom The horse so far

So what’s left? I’d like to leave the head and neck till last, so the front legs first; they have a fair bit of work in them. I have quite a lot of copper passing left from the kit so I may put that in instead of the copper S-ing along the knee and foot. The angles of the leg are such that the S-ing looks a bit awkward there in the model photograph we were given, and rather loses its stem stitch look. We’ll see what suggests itself once I get to that point!

The model's front leg

Leave a comment or ask a question