Although choosing threads (both the type and the colours) is, to me at least, by far the most enjoyable part of getting materials together for a design, the fabric is also very important – not just because of its contribution to the final look of the piece, but also because the pleasure I get from working on a project can be seriously marred or enhanced by the fabric I’m stitching on. I have a few favourites (like that lovely dense linen I’m doing one of the SAL models on) but I’m always on the lookout for nice fabrics to add to my collection.
A week or two ago I contacted Empress Mills about the weight (gsm) of their lightweight and heavyweight Mountmellick fabrics and they very generously sent me a couple of samples. It’s a cotton sateen, and that type of weave means it looks different back and front, because the weft goes over several warp threads in one leap instead of going over one, under one. The picture shows one side of the heavyweight and the other of the lightweight.
The samples were just big enough to fit into a 3″ hoop, so I decided to try them with my little Quatrefoil flower to see what they are like to work on.
Both allowed for a well-lit-window transfer (I couldn’t easily get at my lightbox) and both of them have a nice “feel”, but from first impressions I thought the heavyweight would be more suitable for use in kits as it’s nice and sturdy; and would the two weights stand up differently to the goldwork threads being plunged, I wondered?
The lightweight, which I tried first, took it quite well, although the strain put on it by plunging the Jap threads did seem to distort it a bit. It was absolutely fine for the crewel part. It’s quite a dense weave so it’s easy to place the needle just where you want it, and in fact it would be perfectly good fabric for any kits bar the goldwork one, especially with the light calico backing I usually include.
The heavyweight was next. As they are both Mountmellick fabric/cotton sateen I’d rather expected them to look exactly alike with the only difference being the weight, but the heavyweight somehow looks a little more even and this sample at least is also somewhat straighter on the grain. But would the difference be noticeable in practice?
Yes it was, but really only the difference in weight. The weave on both samples is more or less equally dense, and placing the needle was therefore equally easy. The weight of this sample, however, did sometimes make it slightly more difficult to pull the needle through, especially where there was a lot of previous stitching to get through. On the other hand, it stood up much better to plunging and having the gold threads secured at the back without distorting the front. I think this fabric would work particularly well if you’ve got a project that needs a solid ground but for whatever reason you’d prefer not to use an extra backing fabric. I’d have to try it on a bigger design, but I’d expect it to work just fine with a moderate amount of goldwork, and certainly with anything lighter.
So I ordered some of the heavyweight, as well as half a metre of another fabric they do which is simply called “cotton sateen”, and which is available in all sorts of interesting colours. As Mountmellick is a type of cotton sateen I wondered what the difference was, and when I rang Empress Mills the lady told me it was mostly the weight. The fabrics arrived last week (I showed a picture of them in the previous FoF) and the cotton sateen does indeed feel much like the lightweight Mountmellick fabric. I may get a few more colours, as it looks like a useful kit fabric!