Twin butterflies (continued)

A few months ago I wrote about a butterfly sketch which I intended to turn into two versions, Beginner and Intermediate, possibly to be used in workshops. My first stitched version showed up a few things that needed attention, and so I decided to stitch two models of each of the versions – one each at the original size I printed it at, using special threads (respectively silks and variegated perles), and one each at a slightly smaller size, using coton à broder #16 (slightly thicker than the more usual #25).

And here they are! The Beginner butterfly had its body stitch changed from the initial sketch, but as that was done before I stitched the first model they both use the interlocking buttonhole/blanket stitch. The stitch for the head was changed between models; the buttonhole stitches in the first model simply wouldn’t behave and make a nice, neat oval. I changed it to a “spoked” arrangement consisting of straight stitches only. The wings are whipped running stitch in both models, but in the second model the running stitches are shorter and closer together, to give a smoother line. I could have used whipped backstitch for an even smoother effect, but decided to keep that for the Intermediate butterfly.

The first version of the beginner's butterfly The second version of the beginner's butterfly

I really like the look of the interlocking buttonhole stitch, but I resisted the temptation to re-use it in the Intermediate butterfly and instead used what I had envisaged in my original sketch, buttonhole stitch closed into segments by straight stitches, each segment decorated with a French knot (there were one or two segments that had come out too small to accommodate a knot, so they were left empty; as they were fairly symmetrically spaced – at the ends of both models and in the middle of the second – it doesn’t look too odd). Incidentally, I did wonder whether to call it buttonhole stitch or blanket stitch as many books and other sources seem to use the terms interchangeably. My personal understanding is that it’s buttonhole stitch when it is very densely worked (as you would around a buttonhole), and blanket stitch when the teeth are more widely spaced as they are in these butterflies. But I must admit to being a bit slap-dash in deciding what I call it in any given design.

The two lines of Mountmellick stitch in the top wing were meant to have their pointy bits together at the body end, but in the first model I started from the wrong side. It looks fine that way too, it’s just not the effect I had in mind smiley. The second model shows the stitches worked the way I intended them to be. I like the look of the communal starting point, and am using something similar (but with the two lines back to back along their entire length) in some of the experimental leaves for the Tree of Life.

Finally a note about the antennae. They are couched pistil stitches, and I added the couching as an afterthought because I wanted a nice elegant curve to the antennae, and pistil stitches don’t curve. But I’m not sure I like the look of the couching. No, that’s not true. I’m sure I don’t like the look of the couching, it just looks clumsy. So the final version of the Intermediate butterfly will have straight antennae, unless I (or any of you) can think of a different way of introducing the desired elegant curve.

The first version of the intermediate butterfly The second version of the intermediate butterfly

And that’s it as far as the butterflies are concerned for the time being. I haven’t got any firm plans for Butterfly workshops at the moment, as there are four K&S ones plus probably some more Church Building Fund ones to prepare for first. The Beginner and Intermediate butterflies will hibernate in my project folder until the time is ripe for them to stretch their wings and become a stitch sampler for some Beginning and Intermediate stitchers!

Change in progress (III) – Twin butterflies

While I was on a roll with the tulip-and-some-other-flower designs last month I took the opportunity to tidy up a drawing I did some time ago; it’s not dated but from the surrounding scribbles it seems to have been intended as a freestyle project for beginners.

Sketch for a butterfly project for beginners

But not just for beginners – there are stitch suggestions for what might be called an intermediate version as well. So when I edited the sketch on the computer I created two versions, one with basic stitches as a project for people with little embroidery experience, and one with slightly more advanced stitches for those who are familiar with the basics and would like to branch out.

Two butterfly variations

Having tidied up the two butterflies I was looking forward to trying them both, especially the second version which promised to be quite interesting texturally. But I decided to take them in order and begin with the basic butterfly. I’d printed both butterflies at a little under 9cm high, transferred them to Rowandean’s embroidery cotton and picked some lovely Splendor silk threads (the same ones I used for my mother-in-law’s 90th birthday present). True, if this ever makes it into a workshop I won’t of course be using silk threads, but why not give myself a treat while model stitching? Well, the threads were indeed a treat but as I was stitching I soon found that even a basic butterfly may need to go through quite a few changes during the design process!

The first thing to become obvious was that the butterfly’s size meant I’d have to work with four strands to make the stitches stand out and fill the space sufficiently. This worked all right in most cases but combined with the very soft nature of Splendor silks it didn’t look very good in the chain stitch part; the stitches just blended into each other, the loops didn’t show their open centres, and the whole thing lacked definition. So my next version will smaller, worked in standard cottons, and use a maximum of three strands.

Silk chain stitch lacking definition

The buttonhole wheel I had planned for its head turned out lumpy and awkward. That will have to be changed in the new model, probably to backstitch with straight stitch “spokes” for the Beginner version, and whipped backstitch for the Intermediate one.

A lumpy buttonhole wheel

For the wings I’d chosen whipped running stitch, and I will keep that, but I will definitely have to make the stitches smaller – my rather hasty ¼” version doesn’t make for a nice smooth outline…

Spiky whipped running stitch

And finally there was the butterfly’s body. It was charted in both versions as buttonhole stitch with a line of backstitch to close the teeth end, and each of the sections adorned with a French knot. But then I though it would be nicer to have two different types of body for the two different butterflies, and I also decided to leave French knots for the Intermediate version. So the Beginner body got changed to two opposing lines of buttonhole stitch, with the teeth interlocking. I like the effect of it and will keep that in the final design, but I must remember that for the teeth on the second line to be centred between the teeth of the first line, it is important not to bring the needle up centrally – because of the way buttonhole stitch works, this actually pushes the teeth off-centre.

Spiky whipped running stitch

It sounds like not a lot is left of the original idea, doesn’t it? But I do like this butterfly, and most of it will actually be as originally planned. When I’ve stitched the revised version you’ll see it hasn’t changed that much from the first try – well, except for the difference between soft shiny silks and thinner, sharper cotton threads, of course!

The first butterfly

And talking of threads, as the butterfly is meant to be usable for a beginners’ workshop I felt it might better not to use a stranded thread at all, but something indivisible. Perle #8 is one option, and I’ve got quite a collection of it, so I will probably try it on one of the smaller butterflies. It can be quite twisty, however, which might be a problem. The other I will work in coton à broder #16 – a little thinner, but easy to work with. Unfortunately I only had two of those in my stash, so I treated myself to a small collection of useful colours. Don’t they look inviting?

Coton a broder no. 16 Coton a broder wound on bobbins in a project box