A manageable frame

If you’ve been following my RSN Certificate progress you may have picked up a hint or two (or three, or four…) that I do not like working with the slate frame. Well, that’s not absolutely true, I do greatly appreciate the excellent tension you get on a slate frame, and I rather enjoy doing embroidery in a way that connects me with stitchers from many centuries ago; what I do not like was its size, which means you have to use it with trestles, which in turn means that even with considerable added tilt, the work is still at a near-horizontal angle.

A near-horizontal slate frame

This seems to work for some, maybe even most people (although I have heard from at least one RSN graduate that she hardly ever uses a slate frame anymore because it “did her back in”) but I am hampered by my eyesight. Not only am I very short-sighted, I have protein deposits in one eye which cause blurring. Together they make it impossible for me to see the whole slate frame in focus when it is positioned on the trestles. I could reasonably comfortable work on the bottom third of the design, and also on the top third by the simple expedient of turning the frame round. It was when working on a particularly challenging part right in the middle of the design that I found the only way I could see well enough to do the stitching with the required level of accuracy was to stand up and bend over the frame. Doing my back in? I’ll say!

Back-breaking work at the slate frame Back-breaking work at the slate frame

It was very clear to me that I needed a smaller slate frame. The RSN don’t do anything smaller than my present 18″ one, but several other people do, among them Jenny Adin-Christie, a former tutor and studio embroiderer at the RSN and therefore well-acquainted with what is required of a slate frame. It just remained to convince the RSN that I could, in fact, do the next three modules on a 12″ slate frame as the size requirements were so much smaller than for the Jacobean module (A5 max instead of A4). Initially they were not happy with the idea; it took a fair few emails (including mentioning that I would not be able to continue with the Certificate in the present set-up) and a promise that I would discuss it with my tutors, but in the end they did agree and the very next day I ordered my smaller frame.

A smaller slate frame

It’s difficult to tell the size when seeing it in isolation, so here it is (with pinned lengths of herringbone band to help it keep its shape) on top of the old one – once on top of the covers and once showing my Jacobean piece, which actually very nearly fits!

The new slate frame on top of the old The smaller frame would almost accommodate the Tree!

The main thing about getting this smaller slate frame was that I could dispense with the trestle set-up. But it’s obviously too big to hold – it needs a stand of some sort. On her site, Jenny Adin-Christie says this size can be used with a Lowery, although it will need support on the unclamped side. Well, that’s not going to be a problem – remember this?

A Meccano solution (with cat) The Meccano prop in place

But the Lowery is not ideal from a portability perspective. To use this frame at my classes it would be really helpful if it worked with the Aristo lap stand, the arms of which in their natural state are not quite long enough to support the slate frame at full stretch.

The arms of the Aristo lap stand are not quite long enough

Once again, Meccano and Mr Mabel’s engineering expertise to the rescue! (He has modestly requested I show only his hands, not his face.)

Picking useful bits of Meccano Putting things together

And here it is, ready for use when I start my Canvaswork module (whenever that may be…)

The finished extension in place The finished extension in use

PS By the way, the conversations with my tutors about the slate frame were interesting. One said that it was unusual but she had no doubt I’d manage as long as I could find a stand to use it with in class (sorted, see above); with the other, the conversation went as follows: “I’ve been allowed to work on a smaller frame.” “Yeah, that’s fine.” “No, but a much smaller frame.” “Yes, OK.” “I mean, 12-inch small”. “Yes, fine.” Well, that was obviously a big problem smiley.

2 comments on “A manageable frame

  1. Meccano, never fails, brilliant job David! Also happy birthday Ilke, hope you enjoyed your day whatever you managed to do. Take care both

Leave a comment or ask a question